yandex
DRS
DRS
DRS

DRS

1 ₽
Количество
шт

DRS for commissioning

  • Manual, or with damper actuator
  • Graded and lockable commissioning solution
  • Air permeability class 0 and C, EN 1751 compliant
  • Damper position indication

DRS-T for shut-off
  • Manual, or with damper actuator
  • Air permeability class 4 and C, EN 1751 compliant
  • Damper position indication


Оставить заявку
Рассчитать стоимость

В наличии

Цены на сайте носят ориентировочный характер и подлежат уточнению при согласовании заказа менеджером компании МСК

DRS Ø100 – Ø630 is a manual commissioning damper, at dim. 100 – 315 actuator type CM can be mounted. DRS-M Ø400 – Ø 630 is an actuator-controlled commissioning damper. DRS and DRS-M satisfy the EN 1751 requirements for air permeability class 0 and C. DRS-T Ø100 – Ø 630 is a manual commissioning and shut-off damper. DRS-T-M DRS-T-M Ø100 – Ø 630 is an actuator-controlled commissioning and shut-off damper. DRS-T and DRS-T-M satisfy the EN 1751 requirements for air permeability class 4 and C. The damper's operating temperature is max. 100°C.

Design

DRS and DRS-T are supplied with graduated scale and lockable commissioning solution. DRS-M and DRS-T-M are equipped with actuator bracket, and the dampers are available with actuator mounted. On the DRS Ø100 – Ø315 (fig. 1), provisions have been made for subsequent installation of Belimo CM actuators. On DRS 400 - 630 and on DRS-T 100 - 630 actuator can be retrofitted. You must use a retrofit kit, EMK. EMK-F is used together with LF- and SF actuators. Video showing the assembly, can be found further down this side.

Materials and surface Coating

DRS Ø100 – Ø315 has galvanised steel casing, bracket and scale, whereas the damper, support and commissioning solution come in a plastic design. DRS Ø400 – Ø630 features a casing, damper, shaft, bracket and scale in galvanised steel. Support and spacer are in a plastic design. DRS-M Ø400 – Ø630 has galvanised steel casing, damper, shaft and actuator bracket, whereas the support come in a plastic design. DRS-T has galvanised steel casing, damper, bracket and scale. The damper blade is fitted with rubber gasket, and the supports are in a plastic design. DRS-T-M has galvanised steel casing, damper, bracket and shaft. The damper blade is fitted with rubber gasket, and the supports are in a plastic design. All damper types are equipped with EPDM rubber gasket.

Поделиться

вы недавно просматривали