yandex
BVZAXN 6_9_12/56

BVZAXN 6_9_12/56

1 ₽
Количество
шт

FOR CONVEYING SMOKE GASES OF TEMPERATURE CLASSES F200, F300 AND F400

  • For installation in the fire zone without additional cooling.
  • Low-noise operation due to low circumferential speeds and high pressure coefficients.
  • Optimised outlet guide vanes to increase the pressure coefficients.
  • Extensive adjustments to the relevant operating point and subsequent motor rating corrections can be made by steplessly adjusting the impeller blades without any need to disassemble the impeller (the impeller blades cannot be adjusted in the case of the F400 temperature class).
  • The desired operating point is optimised to achieve the best possible efficiency using a variable number of blades (6 / 9 / 12).
  • 15 sizes
  • Impeller’s nominal diameter 315 to 1,600 mm
  • Volume flow rate max. 230,000 m³/h
  • Total pressure max. 3,150 Pa
  • Casing available in all RAL colours


В наличии

Цены на сайте носят ориентировочный характер и подлежат уточнению при согласовании заказа менеджером компании МСК

Application

  • For installation inside and outside of the fire zone.
  • Suitable for free inlet / outlet or for pipeline installation in a horizontal and vertical style.
  • Dual smoke extract and ventilation function.
  • Based on two fans connected in series, suitable for extracting smoke from underground car parks and extract air (66% redundancy in emergency mode)

Variants

  • Temperature class F200 / F300 / F400


Accessories

  • Fan diagnosis system VD
  • Volume flow rate measuring unit VME
  • Shock pulse bearing monitoring STI
  • Acoustic and thermal insulation
  • Weather protection roof for acoustic and thermal insulation
  • Round silencers TSR (inlet and outlet side)
  • Round silencers TSR with interior core (inlet and outlet side)
  • Extension duct
  • Inspection hatch
  • Self-powered shut-off damper
  • Flexible connectors
  • Matching flange
  • Equipotential bonding
  • Bellmouth
  • Cover grille (inlet and outlet side)
  • Diffuser
  • Diffuser with interior core
  • Outlet duct with cover grille
  • Mounting feet
  • Brackets (for vertical assembly)
  • Spring anti-vibration mounts
  • Terminal box
  • Local isolator loose (for outside of fire area)
  • Angular wall ring with brackets (inlet and outlet side)
  • Silicone-free type
  • Extract air and smoke extract controller
  • Surface protection powder-coated and/or
  • hot-dip galvanised in corrosion protection category C2 to C5M

Поделиться